Kawasaki STX-15F service manual Mirror Stay Installation

13-10 HULL/ENGINE HOOD

Fittings

Mirror Stay Installation

•Be sure the dampers [A] are in position (both sides).

•The right plate [A] on the inside of the hull has a R mark [B] and the left plate [C] has L mark [D].

•Apply a non-permanent locking agent to the mirror stay bolts and tighten them securely.

•Install the damper [A] onto the hull.

NOTE

○Apply a little oil to the damper to make installation easy.

•Install the flushing fitting [A] into the damper [B].