Kawasaki STX-15F service manual Self-Diagnosis Self-diagnosis Outline, User Mode, Dealer Mode

3-22 FUEL SYSTEM (DFI)

Self-Diagnosis

Self-diagnosis Outline

The self-diagnosis system has two modes and can be switched to another mode.

[A]Push the “SET” button with “MODE” button at the same time for 3 seconds or more.

[B]Push either “SET” or “MODE” button for more than one second or more.

User Mode

This is a standard mode and enters automatically after ignition switch ON. The ECU notifies the rider of troubles in DFI system and ignition system by flashing LED warn- ing light [A], the FI indicator [B] and “FI” character [C] when DFI system and ignition system parts are faulty, and initiates fail-safe function. The buzzer sound goes on. In case of se- rious troubles ECU stops the injection/ignition/starter motor operation. The buzzer sound can be stopped by pushing either “SET” or “MODE” button.

Dealer Mode

The LCD in the meter unit displays service code charac- ter [A] to show the problem(s) which the DFI system and ignition system has at the moment of diagnosis.

•To enter the dealer mode push the “SET” button [B] with “MODE” button [C] for 3 seconds or more.

•Read the service code character in the LCD display. Re- fer to the “Service Code (Character) Table” in the following section.

•To return the user mode push either “SET” or “MODE” button for one second or more.

•The service code character(s) will not be shown on the LCD in the meter unit after the problems are solved.