Kawasaki STX-15F service manual Speedometer Inspection

ELECTRICAL SYSTEM 14-59

Multifunction Meter

Fuel Level Gauge/Symbol/FUEL Characters/Warning

Light Inspection

•Connect the 12 V battery and terminals in the same man- ner as specified in the “Display Function Inspection”.

•Connectshown. the variable rheostat [A] to the terminal [5] as JT1500-A2 model ∼ [B]

JT1500-A1 model [C]

•Check that the number of segments matches the resis- tance value of the variable rheostat.

Resistance Value (Ω)	Display Segments
8030		0*
2930	1	∼	2
1330	3	∼	4
510	5	∼	6
0	7	∼	8

*: The LED warning light, fuel symbol and FUEL char- acters flash at the same time.

•If any display function does not work, replace the meter assembly.

Speedometer Inspection

•Connect the 12 V battery and terminals in the same man- ner as specified in the “Display Function Inspection”.

•The speed equivalent to the input frequency is indicated in the oscillator [A] if the square wave (illustrated as shown) would be input into the terminal [8].

JT1500-A2 model ∼ [B]

JT1500-A1 model [C]

○Indicates approximately 60 mph in case the input fre- quency would be approximately 265 Hz.

○Indicates approximately 60 km/h in case the input fre- quency would be approximately 165 Hz.