Kawasaki STX-15F service manual Throttle Cable Installation

3-68 FUEL SYSTEM (DFI)

Throttle Lever, Cable and Case

•Remove the throttle case (see Throttle Case Removal).

•Slide the rubber boot out of the place.

•Unscrew the throttle cable fitting nut.

•Remove the upper end of the cable from the case.

○Use a screw driver [A] to separate the cable tip [B] from the throttle lever catch.

•Remove the steering cover (see Steering Removal in Steering chapter).

•Unscrew the grommet mounting bolts [A] and pull out the plate [B] and grommet [C].

•Take the throttle cable [A] off the grommet [B].

•Pull down the throttle cable.

Throttle Cable Installation

•Lubricate the outside of the new cable with a penetrating rust inhibitor to ease cable installation.

•Slide the tip [A] of the cable lower end on the throttle pivot arm [B].