Kawasaki STX-15F service manual Mirror Removal, Mirror Installation, Mirror Stay Removal

HULL/ENGINE HOOD 13-9

Fittings

Mirror Removal

•Open the front storage compartment cover.

•Unscrew the nuts [A] and washers [B] and remove the mirrors [C] (both sides).

Mirror Installation

•Be sure that the washer [A] are in position.

Mirror Stay Removal

•To remove the right mirror stay [A], remove the bolts [B].

NOTE

○The plate [C] on the inside of the hull will drop down when the last bolt is removed.

•Remove the right mirror (see Mirror Removal).

•Todures.remove the left mirror stay, perform the next proce- ○Loosen the clamp [A] and disconnect the flushing hose

[B].

•Remove the flushing cap.

•Pullhull.up the flushing fitting [A] with the damper [B] from the

•Unscrew the bolt [C] and remove the left mirror stay [D].

NOTE

○The plate [E] on the inside of the hull will drop down when the last bolt is removed.

•Remove the left mirror (see Mirror Removal).