Kawasaki STX-15F service manual Smart Learning Operation mode SLO JT1500-A2 model ∼

1-2 GENERAL INFORMATION

Smart Learning Operation mode (SLO) (JT1500-A2 model ∼ )

This watercraft is equipped with the Smart Learning Operation mode (SLO) and normal operation mode (Full Power Operation, FPO). The SLO mode reduces the maximum watercraft speed by ap- proximately 30 percent for a use by unskilled operators. To change the SLO mode to FPO mode, and back again, push the “MODE” button for 7 seconds or more.

SLO mode is displayed on the meter as SLO.

NOTE

○When shifted to the SLO mode, the initial display, as shown when the ignition switch is turned on, is shown together with a buzzer sound.

○Then, “SLO” is shown blinking at every three seconds. ○Under the SLO mode, all the meter displays and other functions work in the same manner as the normal oper-

ation (Full Power Operation, FPO) mode.

Normal operation mode (Full Power Operation mode, FPO) is shown by FPO display.

NOTE

○When shifted to the normal operation mode (Full Power Operation mode, FPO), the same initial display is first shown and followed by “FPO” for two seconds. How- ever, “FPO” is shown only once when shifted and is not displayed thereafter.

○When the ignition switch is turned off and on again, the same mode when turned off is displayed again.