Kawasaki STX-15F service manual Torque Pump Mounting Bolts 36 N·m 3.7 kgf·m, 27 ft·lb

11-8 PUMP AND IMPELLER

Pump and Impeller

•Be sure trim seal [A] is in place.

•Greasegrease. the splines on the drive shaft with water resistant

•Install the pump.

○Apply a non-permanent locking agent to the pump mount- ing bolts and torque them.

Torque - Pump Mounting Bolts: 36 N·m (3.7 kgf·m, 27 ft·lb)

•Install the grate [A].

○Be sure the trim seals [B] are in the position.

○Apply a non-permanent locking agent to the grate mount- ing bolts and torque them.

Torque - Grate Mounting Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)