Nikon S800c Black, 26358, 26356, S800c White Troubleshooting, Power Supply, Display, and Settings

Troubleshooting

If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative.

Power Supply, Display, and Settings

Problem		Cause/Solution	A
	• Wait for recording to end.
	• If the problem persists, turn the camera off.
		- If the camera does not turn off, remove and
		reinsert the battery or batteries or, if you are
The camera is on but does		using an AC adapter, disconnect and	–
		reconnect the AC adapter.
not respond.
		- Note that although any data currently
		being recorded will be lost, data that have
		already been recorded will not be affected
		by removing or disconnecting the power
		source.
Battery inserted in the	Confirm all connections.		14
camera cannot be charged.
	•	Battery is exhausted.	18
Camera cannot be turned	•	The camera cannot be turned on while	14
on.		connected to an electrical outlet via the
		Charging AC Adapter.
	•	Battery is exhausted.	18
	• The camera and battery may not work		F3
Camera turns off without		properly at low temperatures.
	• The internal temperature of the camera or the		19, E77
warning.
		memory card is high. Allow the camera and
		memory card to cool and turn on the camera
		again.
	•	Camera is off.	18
Monitor is blank.	•	Camera entered display off mode or stand by	19, E71
		mode to save power. Press the power switch.		Tec
	The camera may become hot when shooting
				hn
	movies for an extended period of time or when
Camera becomes hot.			–	ical
	the camera is used in a hot area; this is not a
				Notes
	malfunction.
				and
				Inde
				x

F7