Nikon 26356, 26358, S800c White, S800c Black AF Areas, Viewing Images Taken Using Pet Detection

Scene Mode (Shooting Suited to Scenes)

OPet portrait

•When you point the camera at a dog or cat, the camera detects the pet’s face and focuses on it. By default, the shutter is automatically released when focus is acquired (pet portrait auto release).

•Press the dbutton (A2) and select CContinuous and then select U Single or C Continuous on the screen that is displayed.

-U Single: The camera takes one image at a time.

-CContinuous (default setting): When focus is acquired on the detected face, the camera

automatically releases the shutter 3 times. Continuous shooting speed rate: about 1.3 frames per second. When you manually release the shutter, up to 17 images can be continuously taken while the shutter-release button is held down. Continuous shooting speed rate: about 1.4 frames per second (when Image mode is set to P4608×3456).

BNotes About Pet Portrait Auto Release

•To change the setting, press the d button and select YPet portrait auto release.

-oOn (default setting): The shutter is automatically released when focus is acquired on the detected face.

-pOff: The shutter is not automatically released when a pet’s face is detected. Use the shutter- release button or touch shutter to release the shutter (A53).

•Pet portrait auto release turns off automatically when:

-5 bursts have been taken.

-Internal memory or the memory card is full.

To continue taking images with the Pet portrait auto release function, press the d button and set YPet portrait auto release to On again.

BAF Areas

Shooting Features

•When the camera detects a face, a double border (focus area) is displayed around the face, and the double border glows green when focus is acquired.

•When the camera detects multiple faces (up to five faces), the face displayed largest in the monitor is framed by a double border and the others by single borders.

•If the shutter-release button is pressed when no pet faces are detected, the camera focuses on the subject at the center of the frame.

[ 930]

BNotes About Pet Portrait Scene Mode

•Digital zoom cannot be used.

•Depending on the distance of the pet from the camera, the speed of the pet’s movement, the direction the pet is facing, the ambient brightness of the pet’s face, etc., the camera may not be able to detect the pet’s face, or other subjects may be framed by a border.

CViewing Images Taken Using Pet Detection

In full-frame playback mode, if you enlarge an image by rotating the zoom control to g(i), the image is enlarged so that the detected face is displayed at the center of the monitor.

If the camera detected multiple faces when the image was taken, you can tap M or N to display a different face. Once you change the zoom ratio, you will be able to zoom in on an area of the image where there are no faces.

39