Nikon 26356, 26358, S800c White, S800c Black manual Error Messages, E77

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display	Cause/Solution	A
O(flashes)	Clock not set.	84
	Set date and time.
Battery exhausted.	Battery exhausted.	12, 14
	Charge or replace battery.
	Battery temperature is high.
Battery	Turn off camera, and allow battery to cool down before
	resuming use. When this message is displayed, the	19
temperature high.
	power-on lamp starts flashing quickly and the monitor
	turns off after 5 seconds.
The camera will	Inside of the camera or the memory card has become hot.
turn off to prevent	Turn off camera, and allow battery to cool down before	19
overheating.	resuming use.
Camera	Inside of the camera has become hot, and the Wi-Fi
	(wireless LAN) function has stopped.
temperature high.		–
	Press OK and allow inside of camera to cool down before
Wi-Fi disabled.
	resuming use.
Camera	Inside of the camera has become hot, and the connection
	between camera and smart device has been terminated.
temperature high.		–
	Press OK and allow inside of camera to cool down before
Wireless disabled.
	resuming use.
	Camera cannot focus.
Q(● flashes red)	• Refocus.	24, 25
	• Focus on another subject positioned at the same	60
	distance from the camera as the intended subject.
	Camera cannot perform other operations until recording		ReferenceS
Please wait for the	chamber/memory card slot cover during recording.
	is complete.
camera to finish	Wait until message clears from display automatically	–
recording.	when recording is complete. Do not open the battery-
			ection

E77