Nikon 26358, 26356, S800c White, S800c Black manual Troubleshooting

Troubleshooting

	Problem		Cause/Solution	A
		•	Adjust monitor brightness.	74, E56
		•	When the internal temperature of the camera	–
	Monitor is hard to read/has		is high, the monitor darkens to reduce heat
	darkened.		generation. When the internal temperature
		•	cools, the monitor brightens again.	F6
			Monitor is dirty. Clean monitor.
		•	If camera clock has not been set, the “Date not	84
			set” indicator flashes during shooting and
			movie recording. Images and movies recorded
			before the clock is set are dated “00/00/0000
			00:00” or “01/01/2012 00:00” respectively. Set
	Date and time of recording		the correct time and date from the Date &
			time option in the Android™ platform setting
	are not correct.
			menu.
		•
			The camera clock is not as accurate as	85
			ordinary watches or clocks. Periodically
			compare the time of the camera clock with
			that of a more accurate timepiece and reset as
			required.
	No indicators displayed in	Auto info is selected for Photo info in		74, E56
	monitor.	Monitor settings in the setup menu.
		•	Date & time setting has not been made in	84
	Print date not available.	•	the Android™ platform setting menu.
			Another function that restricts the Print date	55
			option is enabled.
		•	Another function that restricts the Print date	55
	Date not imprinted on	•	option is enabled.
	images even when Print		Selected shooting mode does not support	E57
	date is enabled.	•	Print date.
			The date cannot be imprinted on movies.	–
	Camera settings reset.	Clock battery is exhausted; all settings were		85
Technical		restored to their default values.
	Monitor turns off, and the	allow battery to cool down before resuming use.
	power-on lamp flashes	Battery temperature is high. Turn off camera and		19
Notes	green quickly.
		• In some rare cases, the Wi-Fi (wireless LAN)
and			function turns off suddenly and will not turn
	Wi-Fi (wireless LAN) function	•	on.	91, E72
Index	turns off and will not turn		Press the dbutton, tap Settings >
	on.		Privacy > Reboot on the Android™ platform
			home screen, and reboot the camera then
			turn on the Wi-Fi (wireless LAN) settings.

F8