Using the fader function(1) When fading in [a]
In the standby mode, press FADER until the desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
_ FADER -+ M. FADER -+ BOUNCE -+ MONOTONE -+ OVERLAP •
no indicator ÷ DOT • WIPE
(2)
The last selected fader mode is indicated first of all.
Press START/STOP. The fader indicator stops flashing, then light up.
After fade in/out ends, your camcorder automatically returns to the normal
mode.
START/STOP
To cancel the fader function
Before pressing START/STOP, press FADERuntil tile indicator disappears.
Note
You carmot use tbe following functions wbile using tim fader function. Also, you cannot
use the fader function while using the following functions:
Digital effect
Super NightSbot
Color Slow Shutter
Recording still images on a "Memory Stick" in the tape recording or standby mode
(except DCR-TRVI 6}
Tape Photo recording
Interval recording
Frame recording
When you set the POWER switch to MEMORY (except DCR-TRV16)
You cannot use the fader function.
When the OVERLAP, WIPE, or DOT indicator appear in the standby mode
Your can]corder automatically stores tile image recorded on a tape. While timimage is
being stored, the indicators flash fast, and the playback picture disappears. At tbis
stage, tile picture may not be recorded clearly, depending on the tape condition.
52