Dubbing only desired scenes - Digital program editing (on tapes)
(4) Confirming VCRoperation
(_) Insmt a recordable tape into the VCI-{, then set to recording pause.
@ Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial.
@ Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
If the VCR starts recording, the setting is correct.
When recording is finished, the indicator changes to COMPLETE.
vI_Eo E_lr Goa55:o6_DI_sET
CONTROL
.k03 TESt
_ 1"CUT4N"
-CUT OU_'_
IR SETOP
P_S_OUE COMPLETE
When the VCR does not operate correctly
After checking the code in "About IR SETUP codes," set the IR SETUP or tile
PAUSEMODE again.
• Place your camcorder at least 30 cm (12 in.)away from the VCR.
• Rofor to the operating instructions of your VCR.
82