Inserting a scene from a VCR - Insert Editing
To change the insert end point
Press ZERO SET MEMORY again after step 5 to erase the ZERO SET MEMORY indicator and begin from step 3.
Note
Pictures and sound recorded on the portion between tile insert start and end points will be erased when you insert the new scene.
If you insert scenes on the tape recorded on another camcorder
The pictures and sound may be distorted. We recommend that you insert scenes on a tape recorded on your camcorder.
When the inserted picture is played back
Pictures and sound may be distorted at the end of the inserted portion. This is not a malfunction.
Pictures and sound at the start point and the end point may be distorted in the LP mode.
To insert a scene without setting the insert end point
Skip steps 3 and 4. Press • on your camcorder when you want to stop inserting.
93
