Quickly locating a scene- ZERO SET MEMORY
Your camcorder goes forward or backward to automatically stop at a desired scene
having a tape counter value of "0:00:00". Use tile Remote Commander for this
operation.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you want to locate later. The tape
counter shows "0:00:00" and then starts counting. The ZERO SET MEMORY
indicator flashes.
(3) Press • when you want to stop playback.
(4) Press _ torewind the tape to the tape counter's zero point. The tape stops
automatically when the tape counter reaches approximately zero. The ZERO
SET MEMORY indicator disappears, and the time code appears.
(5) Press IDa.Playback starts fi-om the counter's zero point.
DISPLAY _----" _= ZERO SET
MEMORY
ml=_

=>

3
g
o
o
Notes
• When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
function will be canceled.
• There may be a discrepancy of several seconds from the time code.
If a tape has a blank portion between recorded portions
The zero set memory function may not work correctly.
69