Labeling a cassette
Ifyou use a cassette with cassette memory, you canlabel a cassette. Labels can
consist of up to 10 characters and are stored in cassette memory. When you
insert the labeled cassette and set the POWER switch to CAMERA or VCR, the
label is displayed for about five seconds.
(1) Insert the cassette you want to label.
(2) Set the POWER switch to CAMERA or VCR.
(3) Press MENU, then select TAPE TITLE in _ with the SEL/PUSH EXEC dial
(p. 181). The tape title display appears.
(4) Turn the SEL/PUSH EXEC dial to select the column of the desired character,
then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
(6) Repeat steps 4 and 5 until you complete the label.
(7) Turn the SEE/PUSH EXEC dial to select {SET], then press the dial.
The label is stored in memory.
(8) Press MENU to erase the menu display.
MENU
I_CM ET READY
TITLE DSPL
CM SEARCH
CM SET
TITLE DSPL
TAPE TITLE[]
12346
FGHIJ aTBB0
KLBNo ,., /-
PQR8T [ ÷]
UVWXY [SET]
IMENUI£ND
103