Recording still images on a tape - Tape Photo recording
If you record a moving subject with the tape photo recording
The picture may fluctuate when you play back the still images on other equipment.
This is not a malfunction.
To use tape photo recording using the Remote Commander
Press PI-{OTO on the Remote Commander. Your camcorder records a picture on the
screen hnmediately.
To use the tape photo recording during normal recording on atape
You cannot check the image on tile screen by pressing PHOTO lightly. Press PHOTO
deeper. The still image is then recorded for about seven seconds and your camcorder
returns to the standby mode.
To record still images with higher quality (except DCR-TRV16)
We recommend that you record on "Memory Stick"s using the memory photo
recording (p. 112).
<
.=
;o
o
o
=o
47