Frame by frame recording-Frame recording

You can make arecording with astop-motion animated effect using fi'ame recording.

To create this effect,alternately move the subject alitlle and make a flame recording.

We recommend that you use a tripod, and operate your camcorder using the R_mote

Commander after step 4.

(1) In the standby mode, press MENU. Select FRAME REC in _ with the SEL/
PUSH EXEC dial (p. 177).
(2) Select ON with the SEL/PUSH EXEC dial.
(3) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(4) Press START/STOP to sta;t frame recording. Your carncorder makes a
recording for about six frames, and returns to recording standby.
(5) Move the subject, and repeat step 4.
MENU
To cancel the frame recording
Perform either of the following:
Set FRAME REC to OFF in the menu settings.
Set the POWER switch to other than CAMERA.
Note
The proper remaining tape is not indicated ifyou use the frame recording function
continuously.
When the POWER switch isset to MEMORY (except DCR-TRV16)
You cannot use the frame recording.
When using the frame recording function
The last recorded frame is longer than other frame.
64