Recording a picture
-Except DCR-TRV16
Recording with tile self-timer starts in 10 seconds automatically. You can also use the
Remote Commander for this operation.
(1) In the standby mode, press MENU, then select SELFT1MER in _{_ with the
gEL/PUSH EXEC dial (p. 177).
(2) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(3) Press MENU to make the menu settings disappear.
The _.) (self-timer) indicator appem,'s on the screen.
(4) Press START/STOP.
Self-timer starts counting down from I0 with a beep. In the last two seconds of
the countdown, the beep gets faster, then recording starts automatically.
START/STOP
START/STOP
To stop the countdown
Press START/STOP.
To restart the countdown, press START/STOP again.
To cancel self-timer
Set SELFTIMER to OFF in the menu settings in the standby mode.
You cannot cancel self-timer using the Remote Commander.
Note
The self-timer is automatically canceled when:
Self-timer recording is finished.
The POWER switch is set to OFF (CHG) or VCR.
When the POWER switch isset to MEMORY
You can also record still images on "Memo_ T Stick"s with the self-timer (p. 116).
36