Searching a recording by date -DATE SEARCH
Note
Ifone day's recording is less than two minutes, your camcorder may not accurately find
the point where the recording date changes.
If a tape has a blank portion between recorded portions
The date search function may not work correctly.
Cassette memory
The tape with cassetle memory can hold six recording data. If you search among seven
or more data, see "Searching for the date without using cassetle memory" below.
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in _ to OFF in the menu settings (p. 181).
(3) Press SEARCH MODE on the Remote Commander repeatedly until the DATE
SEARCH indicator appears.
The indicator changes as follows:
_DATE SEARCH _4, PHOTO SEARCH _ PHOTO SCAN _ no indicator /
(4) Press _ on the Remote Commander to search for the previous date or press
on the Remote Commander to search for the next date. Your camcorder
automatically starts playback at the point where the date changes. Each time
you press _ or _ your camcorder searches for the previous or next date.
To stop searching
Press II.
72