Kawasaki STX-15F Camshaft Position Sensor Removal, Camshaft Position Sensor Installation

14-42 ELECTRICAL SYSTEM

Ignition System

Measuring spark plug lead resistance

•Check the spark plug lead [A] for visible damage.

If the spark plug lead is damaged, replace the spark plug lead.

•Measure the lead resistance with the hand tester [B].

Spark Plug Lead Resistance

Standard: 3.75 ∼ 6.25 kΩ

If the hand tester does not read as specified, replace the lead

Camshaft Position Sensor Removal

•Remove:

Seat (see Hull/Engine Hood chapter)

•Cut off the clamp [A].

•Disconnect[B]. the camshaft position sensor lead connector

•Remove:Camshaft Position Sensor Bolt [A]

Camshaft Position Sensor [B]

Camshaft Position Sensor Installation

•Apply grease or engine oil to the O-ring on the camshaft position sensor.

•Tighten:

Torque - Camshaft Position Sensor Bolt: 9.8 N·m (1.0 kgf·m, 87 in·lb)