Kawasaki STX-15F service manual Fuel Pump Removal, JT1500-A2 ∼ model

3-84 FUEL SYSTEM (DFI)

Fuel Pump

Fuel Pump Removal

CAUTION

Never drop the fuel pump, especially on a hard sur- face. Such a shock to the pump can damage it.

WARNING

Gasoline is extremely flammable and can be ex- plosive under certain conditions. Pull the lanyard key off the stop button. Make sure the area is well-ventilated and free from any source of flame or sparks; this includes any appliance with a pilot light. Do not smoke.

JT1500-A1 model;

•Remove the front storage pocket (see Hull/Engine Hood chapter).

•Disconnect the fuel pump lead connector [A].

•Loosen the clamp screws [B] and pull out the main [C] and return [D] fuel hoses.

•Cut off the clamp [E] and pull out the fuel vent hose [F].

•Loosen the lower side clamp screw [G] on the rubber fuel pump holder [H].

JT1500-A2 ∼ model;

•Remove the front storage pocket (see Hull/Engine Hood chapter).

•Disconnect the fuel pump lead connector [A].

•Loosen the double spring clamps [B] with priers and pull out the main [C] and return [D] fuel hoses.

•Cut off the clamp [E] and pull out the fuel vent hose [F].

•Loosen the lower side clamp screw [G] on the rubber fuel pump holder [H].

•Pull the fuel pump [A] and rubber holder [B] through the opening gained after removal of the front strage pocket.

•Loose the upper side clamp screw [C] and remove the rubber holder from the fuel pump.