Kawasaki STX-15F Tachometer Inspection, Battery Symbol/bAt Characters/LED Inspection

ELECTRICAL SYSTEM 14-61

Multifunction Meter

Tachometer Inspection

•Connect the 12 V battery and terminals in the same man- ner as specified in the “Display Function Inspection”.

•The revolutions per minute (rpm) equivalent to the input frequency is indicated in the oscillator [A] if the square wave (illustrated as shown) would be input into the termi- nal [7].

JT1500-A2 model ∼ [B] JT1500-A1 model [C]

○The tachometer indicates approximately 3 000 r/min (rpm) in case the input frequency would be approxi- mately 100 Hz.

If the tachometer does not work normally, replace the me- ter assembly.

Battery Symbol/bAt Characters/LED Inspection

•Connect the 12 V battery and terminals in the same man- ner as specified in the “Display Function Inspection”.

•Check that the battery symbol/bAt characters/LED flash when the input voltage to the terminal [A] is lowered to 12 volts or less. And check that the meter returns in the state of normality when the input voltage to the black lead terminal is raised to 12.5 V or more.

If any display function does not work, replace meter as- sembly.