Kawasaki STX-15F service manual Pump and Impeller, Pump Removal

11-6 PUMP AND IMPELLER

Pump and Impeller

Pump Removal

•Turn the craft on its left side.

•Disconnect the reverse cable ball joint at the rear end.

•Unscrew the pump cover mounting bolts [A], and remove the pump cover [B] with the reverse bracket [C].

•Unscrew the grate mounting bolts [A] and remove the grate [B].

•Removejoint. the joint bolts [A] and take off the steering cable

•Loosen the clamps [B] on the inlet cooling hose, and pull off the hoses [C].

•Unscrew the pump mounting bolts [A].

•Slide the pump [B] to the rear to disengage the drive shaft, and remove it from the hull.

•Tocedures.remove the pump bracket, perform the following pro- ○Take out the pump bracket mounting bolts [A] and washer

in the hull.