Kawasaki STX-15F service manual Appendix

APPENDIX 16-17

Cable, Wire and Hose Routing

1.Air Suction Valve Hose (to Air Filter)

2.Air Suction Valve

3.Air Suction Valve Cover (Rear)

4.Water Temperature Sensor Leads

5.Exhaust Manifold

6.Air Suction Valve Hose Fitting

7.Air Suction Valve Cover (Front)

8.Breather Hose

9.Cylinder Head Cover

10.Crankshaft Sensor Leads

11.Fix the crankshaft sensor leads and the oil temperature sensor leads to the dipstick pipe with the band.

12.Dipstick Pipe

13.Inlet Manifold

14.Clamp the engine harness and the crankshaft sensor lead connector.

15.Engine Harness

16.Inlet Air Pressure Sensor

17.Run the inlet air pressure sensor leads under the delivery pipe.

18.Delivery Pipe

19.Oil Temperature Sensor Leads

20.Throttle Sensor Connector

21.Injectors

22.Oil Pressure Switch

23.Oil Filter

24.Oil Cooler

25.Oil Temperature Sensor

26.ISC (Idle Speed Controller) Connector

27.Camshaft Position Sensor Connector

28.ECU (Electronic Control Unit) Connector

29.Clamp the water temperature sensor and camshaft position sensor leads.

30.ISC (Idle Speed Controller)

31.Fix the engine harness to the ISC with the band.

32.Crankshaft Sensor Lead Connector

33.Fix the camshaft position sensor connector and water temperature sensor leads with the band.

34.Inlet Air Temperature Sensor

35.Run the oil pressure switch lead between the cylinder and inlet manifold.