Kawasaki STX-15F service manual Electrical Wiring, Wiring Inspection

14-20 ELECTRICAL SYSTEM

Electrical Wiring

Wiring Inspection

•Visuallyetc. inspect the wiring for signs of burning, fraying,

If any wiring is poor, replace the damaged wiring.

•Pull each connector [A] apart and inspect it for corrosion, dirt, and damage.

If the connector is corroded or dirty, clean it carefully. If it is damaged, replace it.

•Check the wiring for continuity.

○Use the wiring diagram to find the ends of the lead which is suspected of being a problem.

○Connect the hand tester between the ends of the leads.

Special Tool - Hand Tester: 57001-1394

○Set the tester to the × 1 Ω range, and read the tester.

If the tester does not read 0 Ω, the lead is defective. Re- place the lead or the wiring harness [B] if necessary.