Kawasaki STX-15F service manual Hull Replacement

HULL/ENGINE HOOD 13-15

Hull Replacement

To replace the hull, remove the various parts in the follow- ing suggested order.

Battery and Pad

Exhaust Pipe and Expansion Chamber Inlet Manifold

Engine and Mounts Air Filter

Water Box Muffler

Drive Shaft and Shaft Holder Pump and Hoses Steering Cover Handlebar and Steering Steering Cable

Reverse Cable

Crossmember

Fuel Tank and Filler

Bilge and Cooling System Hose Bypass Hose and Outlet Bumpers

Engine Hood Latch

Front Storage Compartment Cover and Brackets Handgrip

The following parts cannot be removed from the hull and must be replaced.

Decals

Labels

Mats

Registration Number (if any)

If the new hull is to be painted, do that first. Then install removed parts in the reverse order of their removal. Finally, install the labels, decals, mats and the registration numbers.