E. Electrical Service and Repair

WARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

WARNING! Risk of Shock! Replace damaged wire with type 105° C rated wire. Wire must have high temperature insulation.

F. Junction Box Installation

WARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

WARNING! Risk of Shock! Replace damaged wire with type 105° C rated wire. Wire must have high temperature insulation.

1.Remove the one screw that secures the junction box to the control tray panel.

2.Route the wire through the strain relief in the outer wrap and down through the knockout located on top side of the junction box. See Figure 12.7.

3.Make the connection inside the junction box to the 120V wire. Connect green to the ground nut, black to black, and white to white.

4.To reattach the junction box, insert one end of the junction box in the slot provided and securely screw the other end of the junction box to the control tray panel.

KNOCKOUT

Figure 12.7 Junction Box Detail

In the event that the junction box may need to be ac- cessed or installed after finish methods have been ap- plied, access is possible by removing the valve assembly (See Figure 11.2).

G. Active Convection Blower Replacement

WARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

WARNING! Risk of Shock! Replace damaged wire with type 105° C rated wire. Wire must have high temperature insulation.

1.Remove fire screen door assembly and any external media or refractory from front of appliance.

2.Remove glass frame assembly by unlatching the four glass latches located at the bottom of the glass frame.

3.Locate the blower mount fastener on either the left or right side of the appliance. See Figure 12.8.

Figure 12.8 Blower Mount Fastener Location

4.Remove fastener with 1/4 inch nut driver as shown in Figure 12.9.

Figure 12.9 Remove Fastener

5.Slide blower forward slightly to release it from the blower mount housing.

6.Locate blower power wires and unplug them from their locations. Note these positions for reinstallation.

7.Remove blower from appliance. See Figure 12.10.

64

Heat & Glo • RED60 • 2159-900 Rev. R • 9/12

Page 63 Page 65
Page 64
Image 64
Heat & Glo LifeStyle RED60 2159-900 manual Electrical Service and Repair Junction Box Installation
Page 63 Page 65

RED60 2159-900 specifications

The Heat & Glo LifeStyle RED60 2159-900 is a modern and innovative gas fireplace that exemplifies cutting-edge design and advanced heating technology. With its sleek aesthetics and smart features, this fireplace is designed to elevate both comfort and style in any living space.

One of the main features of the RED60 is its impressive heat output. This model boasts a high efficiency rating, ensuring that homeowners can enjoy warmth without excessive energy consumption. The fireplace can deliver an output of up to 60,000 BTUs, making it suitable for both large and small areas. This efficient performance means less environmental impact, aligning with the growing emphasis on sustainability in home heating solutions.

The design of the Heat & Glo LifeStyle RED60 is another standout aspect. Its expansive glass viewing area provides a panoramic view of the flames, creating a beautiful focal point in any room. The minimalist frame enhances the contemporary aesthetic, allowing it to seamlessly complement various interior styles, from modern chic to traditional elegance.

In terms of technology, the RED60 incorporates advanced combustion systems, ensuring cleaner emissions without sacrificing performance. This technology not only contributes to a healthier indoor environment but also helps reduce the carbon footprint associated with home heating. Additionally, the fireplace features a patented heat distribution system, which optimally circulates warmth throughout the space, eliminating cold spots and enhancing overall comfort.

The RED60 also offers convenience through its intuitive remote control system. Users can easily adjust the flame height, heat output, and even set timers, providing ultimate flexibility in managing their indoor climate. For those who prefer a more hands-on approach, manual controls are also available, making it user-friendly for everyone.

Moreover, the installation process is simplified with the unit's flexible venting options, which can accommodate various configurations to suit different homes. Whether designing for a new build or retrofitting an existing space, this versatility appeals to homeowners and builders alike.

In summary, the Heat & Glo LifeStyle RED60 2159-900 is a blend of style, efficiency, and advanced technology. Its high heat output, sleek design, and intuitive controls make it an excellent choice for anyone seeking to enhance their living environment with a modern gas fireplace.
Top Page Image Contents