H. Sheet Metal Refractory Instructions

A Sheet Metal Refractory Kit is available for use with the RED60 models. This kit contains the components neces- sary to install metal refractory on the RED60-NNN model. Install Sheet Metal Refractory Kit according to these in- structions.

CAUTION! Risk of Cuts or Abrasions. Wear protective gloves and safety glasses during installation. Sheet metal edges are sharp.

NOTICE: The installation of the sheet metal refractory kit may require the air shutter setting to be changed. See Section 14.K of this manual to ensure the shutter gap is set correctly before firing the appliance.

Kit Contents:

(2)Outside corner trim pieces. See Figure 1.

(1)Front Inside base. See Figure 2.

(1)Rear Inside base. See Figure 2.

(1)Outside front trim base. See Figure 3.

Tools Required

Cordless Drill

1/4 inch hex head driver tip

Figure 1. Outside Corner Trim Pieces.

Figure 2. Front and Rear Inside Base Piece.

Figure 3. Outside Front Trim Base Piece.

1.Install rear inside base piece. Position piece into bottom of fireplace with tabs facing the burner. Center piece from front to back. There will be a gap between the front edge of the base piece and the burner area and also a gap between the back of the base piece and the rear firebox panel. These two gaps should be equal. See Figure 4.

2.Install front inside base piece. Position piece into bot- tom of fireplace with tabs facing the outside edge of the firebox. Center from front to back. There will be a gap between the front edge of the base piece and the front of the firebox and also a gap between the back of the base piece and the burner rail. These two gaps should be equal. See Figure 4.

ALL GAPS EQUAL

TABS

Figure 4. Placing Base Pieces.

3.Install glass frame assembly and spring lock into posi- tion according to instructions in appliance installation manual. Set access panel into position.

4.Position access panel so tabs are facing the glass assembly. Insert into glass frame. See Figure 5.

GLASS ASSEMBLY

TABS FACE GLASS

ASSEMBLY

Figure 5. Positioning Access Panel.

GLASS ASSEMBLY

ACCESS PANEL

Figure 6. Access Panel Installed.

5.Place outside front trim base onto access panel. Place so the cutouts are in line with the outside edges of the glass frame. See Figure 7.

84

Heat & Glo • RED60 • 2159-900 Rev. R • 9/12

Page 84
Image 84
Heat & Glo LifeStyle RED60 2159-900 manual Sheet Metal Refractory Instructions, ALL Gaps Equal Tabs

RED60 2159-900 specifications

The Heat & Glo LifeStyle RED60 2159-900 is a modern and innovative gas fireplace that exemplifies cutting-edge design and advanced heating technology. With its sleek aesthetics and smart features, this fireplace is designed to elevate both comfort and style in any living space.

One of the main features of the RED60 is its impressive heat output. This model boasts a high efficiency rating, ensuring that homeowners can enjoy warmth without excessive energy consumption. The fireplace can deliver an output of up to 60,000 BTUs, making it suitable for both large and small areas. This efficient performance means less environmental impact, aligning with the growing emphasis on sustainability in home heating solutions.

The design of the Heat & Glo LifeStyle RED60 is another standout aspect. Its expansive glass viewing area provides a panoramic view of the flames, creating a beautiful focal point in any room. The minimalist frame enhances the contemporary aesthetic, allowing it to seamlessly complement various interior styles, from modern chic to traditional elegance.

In terms of technology, the RED60 incorporates advanced combustion systems, ensuring cleaner emissions without sacrificing performance. This technology not only contributes to a healthier indoor environment but also helps reduce the carbon footprint associated with home heating. Additionally, the fireplace features a patented heat distribution system, which optimally circulates warmth throughout the space, eliminating cold spots and enhancing overall comfort.

The RED60 also offers convenience through its intuitive remote control system. Users can easily adjust the flame height, heat output, and even set timers, providing ultimate flexibility in managing their indoor climate. For those who prefer a more hands-on approach, manual controls are also available, making it user-friendly for everyone.

Moreover, the installation process is simplified with the unit's flexible venting options, which can accommodate various configurations to suit different homes. Whether designing for a new build or retrofitting an existing space, this versatility appeals to homeowners and builders alike.

In summary, the Heat & Glo LifeStyle RED60 2159-900 is a blend of style, efficiency, and advanced technology. Its high heat output, sleek design, and intuitive controls make it an excellent choice for anyone seeking to enhance their living environment with a modern gas fireplace.