If the PVI-DVP is being installed in a confined space (such as a utility closet, mechanical room or attic space) with a total volume less than 720 cubic ft, an 8 inch by 16 inch hole will be required directly in front of the access panel. The confined space where PVI is installed, and the space to which the access hole opens, must add up to at least 720 cubic feet. This hole may be covered with a decora- tive cover as long as the cover has a minimum of 50% open air. This also applies to a fireplace chase. If the PVI-DVP is being installed in a space greater than 720 cubic ft the 8 inch by 16 inch access hole is still required, but a solid cover may be used.

The access panel opening must be located such that ac- cess for service and adjustment is available. The NEC requires a minimum of 30 inches of space around the opening and 36 inches in front of the opening to the ac- cess panel. Consult officials having jurisdiction regarding regional requirements.

8 IN.

CENTER AIR

OPENING OVER COVER

16 IN.

TOP

= OPTIONAL FINISH MATERIAL AROUND ACCESS PANEL

Figure 7.5 Access Panel Framing Dimensions

CATCH PLATE HOLES

CATCH PLATE

 

 

SCREWS

NOTE: When the PVI-DVP is installed in the upside-down, horiztontal orientation, the supplied catch plate needs to be mounted onto the cover assembly.

Figures 7.7, 7.8, 7.9 and 7.10 show possible framing techniques.

WARNING! Risk of fire and burns! DO NOT install PVI- DVP with the access panel facing upward. Overheating may occur.

ACCESS PANEL

Note: An 8 X 16 inch framed hole is required in front of the access panel. This hole may be covered with an open air louvered cover.

WARNING! Risk of fire and burns! DO NOT install PVI-DVP with the access panel facing upward. Overheating may occur.

Figure 7.7 PVI-DVP Mounted to Horizontal Surface

Note: AN 8 X 16 inch framed hole is required in front of the access panel.

This hole may be covered with

an open air louvered cover.

ACCESS PANEL

Figure 7.6 Mount the Catch Plate

Figure 7.8 PVI-DVP Mounted to Vertical Surface

 

 

Heat & Glo • RED60 • 2159-900 Rev. R • 9/12

25

Page 25
Image 25
Heat & Glo LifeStyle RED60 2159-900 manual Access Panel Framing Dimensions

RED60 2159-900 specifications

The Heat & Glo LifeStyle RED60 2159-900 is a modern and innovative gas fireplace that exemplifies cutting-edge design and advanced heating technology. With its sleek aesthetics and smart features, this fireplace is designed to elevate both comfort and style in any living space.

One of the main features of the RED60 is its impressive heat output. This model boasts a high efficiency rating, ensuring that homeowners can enjoy warmth without excessive energy consumption. The fireplace can deliver an output of up to 60,000 BTUs, making it suitable for both large and small areas. This efficient performance means less environmental impact, aligning with the growing emphasis on sustainability in home heating solutions.

The design of the Heat & Glo LifeStyle RED60 is another standout aspect. Its expansive glass viewing area provides a panoramic view of the flames, creating a beautiful focal point in any room. The minimalist frame enhances the contemporary aesthetic, allowing it to seamlessly complement various interior styles, from modern chic to traditional elegance.

In terms of technology, the RED60 incorporates advanced combustion systems, ensuring cleaner emissions without sacrificing performance. This technology not only contributes to a healthier indoor environment but also helps reduce the carbon footprint associated with home heating. Additionally, the fireplace features a patented heat distribution system, which optimally circulates warmth throughout the space, eliminating cold spots and enhancing overall comfort.

The RED60 also offers convenience through its intuitive remote control system. Users can easily adjust the flame height, heat output, and even set timers, providing ultimate flexibility in managing their indoor climate. For those who prefer a more hands-on approach, manual controls are also available, making it user-friendly for everyone.

Moreover, the installation process is simplified with the unit's flexible venting options, which can accommodate various configurations to suit different homes. Whether designing for a new build or retrofitting an existing space, this versatility appeals to homeowners and builders alike.

In summary, the Heat & Glo LifeStyle RED60 2159-900 is a blend of style, efficiency, and advanced technology. Its high heat output, sleek design, and intuitive controls make it an excellent choice for anyone seeking to enhance their living environment with a modern gas fireplace.