19-13/16 IN.

Figure 11. Installing First Back Panel Granite Piece.

4.Secure granite pieces into place using the angle tabs and screws provided. See Figure 12. Begin with the back left piece and follow with the back middle and then back right side piece.

Figure 12. Fastening Angle Tabs to Secure Granite in Place.

5.Slide side pieces into place from the front and hold in place while installing the angle tabs and screws provided. The correct orientation for the side pieces is 10 inches wide by 16-7/8 inches high. Use retaining tabs, one on each side, to secure each side piece. See Figure 13.

6.Place rear base mesh granite support pieces between burner rail and back of appliance with the bent sides down. They will sit securely on the base pan. Ensure you are placing the mesh piece that does NOT have notches. See Figure 14.

10 IN.

Figure 13. View of Back and Side Pieces Installed.

7.Place notched front base mesh granite support pieces between burner rail and front of appliance. The notched area of the granite support piece will be positioned over the pilot area and will sit securely on the base pan. Proper placement of mesh around pilot is critical to safe operation.

WARNING

Delayed Ignition Risk

Place mesh piece with notch on area around pilot.

DO NOT place mesh piece without notch over pilot. Interruption of pilot flame will occur.

Fireplace will not function properly. Delayed ignition may occur.

NOTCHED AREA

OVER PILOT

Figure 14. Installing Front Base Mesh Granite Support.

Figure 15. Base Mesh Installed.

8.Install the three rear base granite pieces by placing them, one at a time, into position and centering them front to back. The gap between the front edge of the granite pieces and the burner area and between the back edge of the granite pieces and the rear wall should be equal.

9.Install the three inner front base pieces by placing them, one at a time, into position and centering them front to back. There will be a gap between the edge of the granite pieces and the burner area. See Figure 16. The correct orientation for the front pieces is 19-3/8 inches wide by 4-5/8 inches deep.

80

Heat & Glo • RED60 • 2159-900 Rev. R • 9/12

Page 79 Page 81
Page 80
Image 80
Heat & Glo LifeStyle RED60 2159-900 manual Notched Area Over Pilot, Installing First Back Panel Granite Piece
Page 79 Page 81

RED60 2159-900 specifications

The Heat & Glo LifeStyle RED60 2159-900 is a modern and innovative gas fireplace that exemplifies cutting-edge design and advanced heating technology. With its sleek aesthetics and smart features, this fireplace is designed to elevate both comfort and style in any living space.

One of the main features of the RED60 is its impressive heat output. This model boasts a high efficiency rating, ensuring that homeowners can enjoy warmth without excessive energy consumption. The fireplace can deliver an output of up to 60,000 BTUs, making it suitable for both large and small areas. This efficient performance means less environmental impact, aligning with the growing emphasis on sustainability in home heating solutions.

The design of the Heat & Glo LifeStyle RED60 is another standout aspect. Its expansive glass viewing area provides a panoramic view of the flames, creating a beautiful focal point in any room. The minimalist frame enhances the contemporary aesthetic, allowing it to seamlessly complement various interior styles, from modern chic to traditional elegance.

In terms of technology, the RED60 incorporates advanced combustion systems, ensuring cleaner emissions without sacrificing performance. This technology not only contributes to a healthier indoor environment but also helps reduce the carbon footprint associated with home heating. Additionally, the fireplace features a patented heat distribution system, which optimally circulates warmth throughout the space, eliminating cold spots and enhancing overall comfort.

The RED60 also offers convenience through its intuitive remote control system. Users can easily adjust the flame height, heat output, and even set timers, providing ultimate flexibility in managing their indoor climate. For those who prefer a more hands-on approach, manual controls are also available, making it user-friendly for everyone.

Moreover, the installation process is simplified with the unit's flexible venting options, which can accommodate various configurations to suit different homes. Whether designing for a new build or retrofitting an existing space, this versatility appeals to homeowners and builders alike.

In summary, the Heat & Glo LifeStyle RED60 2159-900 is a blend of style, efficiency, and advanced technology. Its high heat output, sleek design, and intuitive controls make it an excellent choice for anyone seeking to enhance their living environment with a modern gas fireplace.
Top Page Image Contents