H.Slide the blower assembly out of the 10-1/2 in. diameter collar for maintenance or replacement.

METAL GUIDE PLATE

MUST BE IN POSITION

AS SHOWN

Figure 7.42

FAN

EXHAUST

PORT

EXHAUST

HOLE

Figure 7.43

2. TO REASSEMBLE THE POWER VENT:

A.Slide the fan assembly into the 10-1/2" diameter collar, making sure that the exhaust port on the fan assembly lines up with the exhaust hole cut in the 10-1/2" diameter collar. See Figure 7.43.

B.The metal exhaust guide plate will have to be bent back inside the fan assembly. See Figure 7.44.

C.Fasten the wire mesh to the 10-1/2" collar to cover the exhaust port hole, using (4) sheetmetal screws.

D.Slide the inner ring inside the cap assembly, carefully positioning the inner ring to its original orientation. See Figure 7.45. Carefully align the screw holes on the 10- 1/2" diameter collar and the inner ring.

NOTE: This inner ring must be returned to its correct ori- entation with the 10-1/2" collar for proper fan operation.

METAL GUIDE PLATE

Figure 7.44

E.Secure the cap assembly to the last vent pipe section. Position the power vent assembly with the exhaust air directed downward to ensure proper operation.

F.Feed the four (4) wires back through the hole on the collar and tighten the nut on the right angle connector. Reconnect the brown and red wire to the vacuum switch and connect the black and white wires to the fan motor.

CAUTION: Make sure the cable is NOT in the path of the hot exhaust air. This can cause the wire insulation to melt and the Power Vent to malfunction.

G. Reattach the end cap to the cap assembly with four

(4) sheetmetal screws. Position the end cap with the louvers pointed downward (horizontal termination).

H.Reconnect the electrical power to the fireplace and turn the fireplace ON/OFF switch "ON" to ensure proper operation of the fireplace and power vent.

INNER RING

COLLAR

END CAP

Figure 7.45

Heat & Glo • RED60 • 2159-900 Rev. R • 9/12

43

Page 42 Page 44
Page 43
Image 43
Heat & Glo LifeStyle RED60 2159-900 manual To Reassemble the Power Vent
Page 42 Page 44

RED60 2159-900 specifications

The Heat & Glo LifeStyle RED60 2159-900 is a modern and innovative gas fireplace that exemplifies cutting-edge design and advanced heating technology. With its sleek aesthetics and smart features, this fireplace is designed to elevate both comfort and style in any living space.

One of the main features of the RED60 is its impressive heat output. This model boasts a high efficiency rating, ensuring that homeowners can enjoy warmth without excessive energy consumption. The fireplace can deliver an output of up to 60,000 BTUs, making it suitable for both large and small areas. This efficient performance means less environmental impact, aligning with the growing emphasis on sustainability in home heating solutions.

The design of the Heat & Glo LifeStyle RED60 is another standout aspect. Its expansive glass viewing area provides a panoramic view of the flames, creating a beautiful focal point in any room. The minimalist frame enhances the contemporary aesthetic, allowing it to seamlessly complement various interior styles, from modern chic to traditional elegance.

In terms of technology, the RED60 incorporates advanced combustion systems, ensuring cleaner emissions without sacrificing performance. This technology not only contributes to a healthier indoor environment but also helps reduce the carbon footprint associated with home heating. Additionally, the fireplace features a patented heat distribution system, which optimally circulates warmth throughout the space, eliminating cold spots and enhancing overall comfort.

The RED60 also offers convenience through its intuitive remote control system. Users can easily adjust the flame height, heat output, and even set timers, providing ultimate flexibility in managing their indoor climate. For those who prefer a more hands-on approach, manual controls are also available, making it user-friendly for everyone.

Moreover, the installation process is simplified with the unit's flexible venting options, which can accommodate various configurations to suit different homes. Whether designing for a new build or retrofitting an existing space, this versatility appeals to homeowners and builders alike.

In summary, the Heat & Glo LifeStyle RED60 2159-900 is a blend of style, efficiency, and advanced technology. Its high heat output, sleek design, and intuitive controls make it an excellent choice for anyone seeking to enhance their living environment with a modern gas fireplace.
Top Page Image Contents