1-15

Cisco CRS-1 Carrier Routing System Multishelf System Upgrade and Conversion Guide
OL-12571-01
Chapter1 Upgrading to a Multishelf System
Configuration Examples for Upgrading to a Multishelf System
RP/0/RP1/CPU0:router(admin-config)# end
RP/0/RP1/CPU0:router(admin)# show controllers fabric plane all
Flags: P - plane admin down, p - plane oper down
C - card admin down, c - card oper down
L - link port admin down, l - linkport oper down
A - asic admin down, a - asic oper down
B - bundle port admin Down, b - bundle port oper down
I - bundle admin down, i - bundle oper down
N - node admin down, n - node down
o - other end of link down d - data down
f - failed component downstream
m - plane multicast down
Plane Admin Oper
Id State State
--------------------
0 UP UP
1 UP UP
2 UP UP
3 UP UP
4 UP UP
5 UP UP
6 UP UP
7 UP UP
Adding an LCC to a Multishelf System: Example

The following example shows how to add an LCC to a multishelf system.

RP/0/RP1/CPU0:router# admin
RP/0/RP1/CPU0:router(admin)# configure
RP/0/RP1/CPU0:router(admin-config)# dsc serial TBC0820031000000 rack 1
RP/0/RP1/CPU0:router(admin-config)# control fabric rack 1 install-mode
RP/0/RP1/CPU0:router(admin-config)# commit

Apply power, attach cables, and check cable LEDs.

RP/0/RP1/CPU0:router(admin-config)# do show controllers fabric rack-status all detail
Rack Rack Server
Num Status Status
---- ------ ------
0 NORMAL PRESENT
1 INSTALL PRESENT Oper State
----------------------
Plane Admin Rack in Rack out
Num State Install of Install
----- ----- ------- ----------
0 UP UP UP
1 UP UP DOWN
2 UP UP DOWN
3 UP UP DOWN
4 UP UP DOWN