Cisco Systems CRS-1 Technical Assistance

1-18

Cisco CRS-1 Carrier Routing System Multishelf System Upgrade and Conversion Guide

OL-12571-01

Chapter1 Upg rading to a Multishelf System

Additional References

Related Documentation for the Catalyst 6509 Switch

For additional documentation related to the installation and configuration of the Catalyst 6509 switch,

see the following Cisco Systems documents:

Related Cisco IOS XR Software Documentation

The Cisco IOS XR software documentation is published at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/ioxsoft/index.htm

Technical Assistance

Related Topic Document Title

Catalyst 6509 installation Cisco Catalyst 6500 Series documentation

Catalyst 6509 configuration and general system

configuration after the fabric installation and

configuration is complete

Cisco IOS XR Getting Started Guide

Description Link

The Cisco Technical Support website contains

thousands of pages of searchable technical content,

including links to products, technologies, solutio ns,

technical tips, and tools. Registered Cisco.com users

can log in from this page to access even more content.

http://www.cisco.com/techsupport

Contents

Main Page CONTENTS 1-1 2-1 Page Preface Changes to This Document Obtaining Documentation Cisco.com Product Documentation DVD Documentation Feedback Cisco Product Security Overview Reporting Security Problems in Cisco Products Product Alerts and Field Notices Obtaining Technical Assistance Cisco Technical Support & Documentation Website Submitting a Service Request Definitions of Service Request Severity Obtaining Additional Publications and Information Page CHAPT ER Upgrading to a Multishelf System Contents Prerequisites for Upgrading to a Multishelf System Restrictions for Upgrading to a Multishelf System Information About Upgrading to a Multishelf System How to Upgrade to a Multishelf System Upgrading the Fabric Cards and Adding an FCC Prerequisites Restrictions SUMMARY STEPS DETAILED STEPS Page Page Page What to Do Next Adding an LCC to a Multishelf System Prerequisites Restrictions SUMMARY STEPS DETAILED STEPS What to Do Next Troubleshooting Tips Configuration Examples for Upgrading to a Multishelf System Displaying Chassis Serial Numbers: Example 1-12 Adding a Fabric Card Chassis: Example The following example shows how to add a single FCC to an existing single-chassis system. 1-13 Power is applied to the FCC at this time. 1-14 The FC/S card is replaced with an FC/M card at this point. The fabric cable is attached to the FC/M card at this point. 1-15 Adding an LCC to a Multishelf System: Example The following example shows how to add an LCC to a multishelf system. Apply power, attach cables, and check cable LEDs. 1-16 Where to Go Next Additional References Related Documents Related Cisco CRS-1 Multishelf Hardware Documentation Related Documentation for the Catalyst 6509 Switch Technical Assistance Related Cisco IOS XR Software Documentation CHAPT ER Converting to an Integrated Switch System Contents Prerequisites for the Integrated Switch System Cisco CRS-1 Multishelf Conversion to an Integrated Switch System Introduction Cisco CRS-1 Multishelf Integrated Switch Solution Benefits of the Cisco CRS-1 Multishelf Integrated Switch Solution Naming Conventions Validating the 22-port SCGE Cards (Single-FCC Multishelf and Two-FCC Multishelf Systems) Connecting the 22-port SCGE to an Active Cat6K (Single-FCC Multishelf and Page Performing a Failover to a Standby 22-port SCGE (Single-FCC Multishelf and Connecting the 22-port SCGEs into a Full Mesh (Single-FCC Multishelf and Page Validating the 22-port SCGE Cards (Four-FCC Multishelf System) Connecting the 22-port SCGE to an Active Cat6K (Four-FCC Multishelf System) 2-11 2-12 Page Performing a Failover to a Standby 22-port SCGE (Four-FCC Multishelf System) Connecting the 22-port SCGEs into a Full Mesh Configuration (Four-FCC Multishelf System) Page INDEX A C D E F P R S T