Heat & Glo LifeStyle RED60 2159-900 manual Top Vent Horizontal Termination Venting with 3 elbows

1. Top Vent - Horizontal Termination - (continued)

Top Vent - Horizontal Termination

Venting with 3 elbows

V1 Minimum		V1 + V2 + H1 + H2 Maximum
2 ft.	610 mm	40 ft.	12.2 m
3 ft.	914 mm	50 ft.	15.2 m
4 ft.	1.2 m	70 ft.	21.3 m

V1 + V2 + H1 + H2 = 70 ft. (21.3 m) Maximum

Note: Must have 24 inches minimum vertical vent prior to attaching any elbow to the appliance.

Note: PVI-DVP can be located in any position except V1.

Note: Use DVP Series components only.

WARNING! Risk of fire and burns! DO NOT install PVI-DVP with the access panel facing upward. Over- heating may occur.

H2

Figure 7.24

V2

H1

V1

Top Vent - Horizontal Termination Venting with more than 3 elbows

Note: Must have 24 inches minimum vertical vent prior to attaching any elbow to the appliance.

Note: PVI-DVP can be located in any position except V1.

WARNING! Risk of fire and burns! DO NOT install PVI-DVP with the access panel facing upward. Over- heating may occur.

Note: Use DVP Series components only.

5 Elbows

V1	Minimum		Total V + Total H Maximum
2 ft.		610 mm	30 ft.	9.1 m
3 ft.		914 mm	40 ft.	12.2 m
4 ft.		1.2 m	50 ft.	15.2 m

Total V + Total H = 50 ft. (15.2 m) Maximum

6 Elbows

4 Elbows

V1	Minimum		Total V + Total H Maximum
2 ft.		610 mm	30 ft.	9.1 m
3 ft.		914 mm	40 ft.	12.2 m
4 ft.		1.2 m	60 ft.	18.3 m

TOTAL V + TOTAL H = 60 ft. (18.3 m) Maximum

V1	Minimum		Total V + Total H Maximum
2 ft.		610 mm	10 ft.	3.0 m
3 ft.		914 mm	20 ft.	6.0 m
4 ft.		1.2 m	40 ft.	12.2 m

Total V + Total H = 40 ft. (12.2 m) Maximum

32 Heat & Glo • RED60 • 2159-900 Rev. R • 9/12