Kawasaki STX-15F service manual Impeller Inspection, JT1500-A1, A2 ∼

11-14 PUMP AND IMPELLER

Pump and Impeller

JT1500-A1, A2 ∼ ;

•Screw on the impeller and torque.

Special Tools - Impeller Holder: 57001-1393

Impeller Wrench: 57001-1228

Torque - Impeller: 98 N·m (10 kgf·m, 72 ft·lb)

•Visuallysary. inspect impeller seal [A], and replace it if neces-

•Install the seal on the impeller.

•Be sure the O-rings [A] are in place on the pump cap [B] and plug [C].

○Apply high grade water resistance grease to the O-rings.

•Install the following. Pump Cap Pump Cap Plug Pump Outlet

Steering Nozzle

○Apply a non-permanent locking agent to the thread of the following.

Pump Cap Bolts

Pump Outlet Mounting Bolts

Steering Nozzle Pivot Bolts

Torque - Pump Cap Plug: 3.9 N·m (0.40 kgf·m, 35 in·lb) Pump Cap Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb) Pump Outlet Mounting Bolts: 19 N·m (1.9 kgf·m,

14 ft·lb)

Steering Nozzle Pivot Bolts: 19 N·m (1.9 kgf·m, 14 ft·lb)

•Be sure the pump seal [A] is in place on the pump case.

Impeller Inspection

•Refer to Impeller Inspection in the Periodic Maintenance chapter.