Kawasaki STX-15F service manual Silicone Sealant Kawasaki Bond 56019-120 -Seals Connector

FUEL SYSTEM (DFI) 3-21

DFI Servicing Precautions

○After measurement, remove the needle adapters and ap- ply silicone sealant to the seals [A] of the connector [B] for waterproofing.

Silicone Sealant (Kawasaki Bond: 56019-120) -Seals

of Connector

•Always check battery condition before replacing the DFI parts. A fully charged battery is a must for conducting accurate tests of the DFI system.

•Do not directly connect a 12 V battery to a fuel injector. Insert a resistor (5 ∼ 7 Ω) or a bulb (12 V, 3 ∼ 3.4 W) in series between the battery and the injector.