Kawasaki STX-15F service manual Front Storage Compartment Cover Assembly

13-8 HULL/ENGINE HOOD

Fittings

•Drill out the rivets [A] with a drill bit [B] of the correct size and remove the front duct cover [C].

Rivet Removal Drill Bit Size

5.0mm (0.2 in.)

NOTE

○Stop drilling when the rivet head starts to turn with drill bit.

○Tap the rivet out with a suitable punch and hammer.

Front Storage Compartment Cover Assembly

•Secure the front duct cover to the front duct [A] with the rivets using a riveter [B].

•Be sure that the trim seals [A] are in position.

•Torque the lock assembly nut.

Torque - Lock Assembly Nut: 4.9 N·m (0.50 kgf·m, 43 in·lb)

•Applybolts. a non-permanent locking agent to the following Air Duct Bolts

Hinge Bolts Damper Bolts