Kawasaki STX-15F service manual Stator Removal, Stator Installation

8-14 ENGINE BOTTOM END

Stator

Stator Removal

•Remove:

Engine (see Engine Removal/Installation chapter) Magneto Cover (see Coupling/Output Shaft Removal) Grommet Cover Mounting Bolts [A]

Grommet Cover [B]

Stator Mounting Bolts [C] with Washers Stator Assembly [D]

Stator Installation

•Applymet. water resistant grease to the outside of the grom-

•Apply a non-permanent locking agent to the grommet cover bolts.

•Tighten:

Torque - Grommet Cover Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)

•Apply a non-permanent locking agent to the stator mount- ing bolts and put the washers.

•Tighten:

Torque - Stator Mounting Bolts: 12 N·m (1.2 kgf·m, 104 in·lb)

○When installing the stator, fix the stator lead to the groove of the magneto cover.

○Be sure to the stator lead have no slack and bite.