ELECTRICAL SYSTEM 14-49

Kawasaki Smart Steering System

Steering Position Sensor and Magnet Removal

Remove the steering holder (see Steering Removal in Steering chapter).

Remove or disconnect:

Steering Position Sensor Lead Connector [A] Leads Clamp on Steering Holder

Steering Position Sensor Mounting Screws [B] Steering Position Sensor [C]

Unscrew[B]. the mounting screw [A] and remove the magnet

Steering Position Sensor and Magnet Installation

Moving the steering shaft in the direction [A] and [B], check the steering shaft for excessive play.

If necessary, adjust the steering shaft nut or replace the bushings.

Apply a non-permanent locking agent to the steering position sensor mounting screws and magnet mounting screw.

Install the steering position sensor [A] to the steering holder and align the projection [B] on the magnet with the hole [C] on the steering shaft plate.

Page 375
Image 375
Kawasaki STX-15F service manual Kawasaki Smart Steering System, Steering Position Sensor and Magnet Removal