Kawasaki STX-15F service manual Cylinder Head Installation

6-22 ENGINE TOP END

Cylinder Head

•Remove:

Engine Hook Bolts [A]

Engine Hook [B]

Cylinder Head Bolts [C]

•Remove:

Upper Dipstick Tube Bolts [A]

Upper Exhaust Side Camshaft Chain Guide Bolt [B]

M7 Cylinder Head Bolts [C]

•Remove the M11 cylinder head bolts [A] and washers.

•Take off the cylinder head.

Cylinder Head Installation

NOTE

○The camshaft cap is machined with the cylinder head, so if a new cylinder head is installed, use the cap that is supplied with the new head.

•Replace that the O-rings [A] of the oil pipe [B] and apply molybdenum disulfide oil solution to them.

•Verify that the oil pipe [A] is installed properly.

•Install a new cylinder head gasket [B], and knock pins [C].