AT&T 1772 manual Installation, Install the Batteries, Basic Connections, Other Connection Options

I N S T A L L A T I O N

Install the Batteries For One Two-Line Wall Jack For Two Single-L

TEL SET jack

L1 OR L1/L2 jack

TEL SET jack

Power cord

L1 OR L1/L2 jack

Two-line wall jack

Line 1 jac

Two-line phone with	Two-line phone
single cord	single cord

INSTALL THE BATTERIES

Open the battery door on the bottom of the unit by pulling on the tabs. Insert the bat- teries as indicated, then close the door.

BASIC CONNECTIONS

For one two-line wall jack

1Plug one end of the phone line cord with clear plugs into the system jack labeled L1 OR L1/L2.

2Plug the other end of the cord into the two-line wall jack.

For two single-line wall jacks

1Plug one end of the phone line cord with blue plugs into the system jack labeled L1 OR L1/L2. Plug the other end of the cord into the wall jack for Line 1.

2Plug one end of the line cord with clear plugs into the system jack labeled L2. Plug the other end of the cord into the wall jack for Line 2.

To connect a two-line phone with a single cord, plug the cord from the phone into the TEL SET jack on the back of the answering system.

NOTE: If a single line phone is connected to the TEL SET jack, it can be used to make and answer calls on Line 1 only.

OTHER CONNECTION OPTIONS

To use these installation options, you’ll need to purchase a dual outlet adapter.

For two single-line phones

1Plug the cord from the phone for Line 1 into the TEL SET jack on the answering system.

2Plug the cord from the phone for Line 2 into the dual outlet adapter.

3Plug the cord from the L2 jack on the answering system into the dual outlet adapter.

4Plug the dual outlet adapter into the Line 2 wall jack.

For two-line phone with two cords

1Plug the cord for Line 1 from the phone into the TEL SET jack on the answering system.

2Plug the other phone cord into the dual outlet adapter.