AT&T 1772 manual Connecting the Power Cord, Setting the Clock, To review the setting, press C

I N S T A L L A T I O N

ine Wall Jacks For Two Single-Line Phones For Two-Line Phone with Two Cords

L1 OR L1/L2 jack	L2 jack
L2 jack
TEL SET jack
Power cord	Power cord
	Power cord

		L1 OR L1/L2 jack
		Line 2 jack
	Line 2 jack	with dual
		outlet adapter
	Line 1 jack
ck		Two-line jack with
		single jack adapter and
		dual outlet adapter
with		Two-line phone with
d		two cords

Two single-line phones

3Plug the cord from the L2 jack on the system into the dual outlet adapter.

4Plug the dual adapter into the Line 2 jack.

For two-line phone with two cords and

a single jack adapter

(requires a single jack adapter)

1Plug the single jack adapter into the dual outlet adapter.

2Plug the cords from the phone into the single jack adapter.

3Plug the cord from the L1 OR L1/L2 jack on the answering system into the dual outlet adapter.

4Plug the dual outlet adapter into the wall jack.

CONNECTING THE POWER CORD

Use only the power cord supplied ! with your system. If you need a

replacement cord, call 1 800 722-9125.

Fit the power cord behind the strain relief tab. Then plug the smaller end of the power cord into the POWER jack at the back of the system. Plug the other end of the power cord into an electrical outlet that is not controlled by a wall switch.

SETTING THE CLOCK

1 Press G. The Message Window displays CH.

2 Press C. You hear a day, and the Window displays a number (1-7 for Sunday - Saturday).

3Hold down For Runtil the correct day is displayed, then release.

4Press C. You hear an hour, and the Window displays it.

5Hold down For Runtil the correct hour is displayed, then release.

6Press C. You hear a minutes setting, and the Window displays it.

7Hold down For Runtil the correct minutes setting is displayed, then release.

8Press C. The system announces the new day and time setting.

To review the setting, press C.