Kawasaki STX-15F service manual Appendix

APPENDIX 16-9

Cable, Wire and Hose Routing

Refer to the Exploded View and Flow Diagram in the Cooling and Bilge Systems chapter. Install the clamp as shown, noting its screw head direction.

1.Bypass Outlet

2.Clamp

3.Holder

4.Bypass Outlet Hose: Run the bypass outlet hose between the fuel tank and the straps as shown.

5.Cooling Hose (Oil Cooler ∼ Exhaust Manifold): Run the cooling hose between the fuel tank and the straps as shown.

6.Cooling Hose (Pump ∼ Oil Cooler)

7.Oil Cooler

8.Water Pipe on the Cylinder Head

9.Position the clamp screw head as shown.

10.Cooling Hose (Cylinder Head ∼ Water Pipe Joint under the Left Water Box Muffler)

11.Protective Tube

12.Cooling Hose (Output Cover ∼ Exhaust Pipe)

13.Output Cover

14.Cooling Hose (Pump ∼ Output Cover)

15.Oil Pan

16.Band

17.Right Water Box Muffler

18.Position the clamp so that its screw head faces downward and outside.

19.Position the clamp so that its screw head faces backward.

20.Pump

21.Drain

22.Cooling Hose (Pump ∼ Output Cover)

23.Left Water Box Muffler

24.Cooling Hose (Left Water Box Muffler ∼ Hull)

25.Fix the No.26 and No.27 cooling hoses with the band.

26.Cooling Hose (Output Cover ∼ Exhaust Pipe)

27.Cooling hose (left water box muffler ∼ cylinder): Run the No.27 cooling hose under the No.26 cooling hose as shown.

28.Exhaust Pipe

29.Position the clamp so that its screw head faces inside.

30.Exhaust Manifold

31.Cooling Hose (Oil Cooler ∼ Exhaust Manifold)

32.Fuel Tank

33.Fuel Tank Strap

34.Shift Cable

35.Fix the No. 6 cooling hose and the shift cable with the band.