Kawasaki STX-15F service manual Pump and Impeller

PUMP AND IMPELLER 11-13

Pump and Impeller

JT1500-A2 ∼ ;

•Replace the grease seals with new ones, if necessary, and install them.

Special Tool - Bearing Driver Set: 57001-1129

○Press each seal [A] into the pump case [B] so that the side with the spring faces outward.

○Fill the gap between the grease seals [C] with high grade water resistance grease and apply it each greace seal lip [D].

•Install the circlip [E].

•Install the bushing [F] into the pump case.

○Fill with high grade water resistance grease [G].

•Install a new bearing into the pump case [A] as far as it will go.

Special Tool - Bearing Driver Set: 57001-1129 [B]

•Visually inspect the pump shaft O-rings [A], and replace if necessary.

•Install the O-ring over the pump shaft [B].

○Grease the O-ring with high grade water resistance greace.

•Apply molybdenum disulfide greace [A] to the thread of the pump shaft

•Push the pump shaft [B] into the pump case.