Kawasaki STX-15F service manual Hull/Engine Hood, Electrical System, Drain Plug Inspection

PERIODIC MAINTENANCE 2-23

Periodic Maintenance Procedures

Steering Shaft [B]

Hull/Engine Hood

Drain Plug Inspection

•Check the drain plugs [A] for cracks or damage and the drain plug mounting screws [B] are tightened securely.

•Check the seals [C] for damage.

If necessary, replace the drain plugs or seals.

Electrical System

Battery Charging Condition Inspection

Battery charging condition can be checked by measuring battery terminal voltage.

•Disconnect the battery terminal leads (see Battery Re- moval in Electrical System chapter).

CAUTION

Be sure to disconnect the negative terminal lead first.

•Measure the battery terminal voltage.

NOTE

○Measure with a digital voltmeter [A] which can be read one decimal place voltage.

If the reading is below the specified, refreshing charge is required (see Refreshing Charge in Electrical System chapter).

Battery Terminal Voltage

Standard: 12.6 V or more

•Connect the battery leads, positive first.

Battery Terminals Inspection

•Check the battery terminal screws [A] for tightness and make sure terminal covers are in place.

WARNING

Loose battery cables can create sparks which can cause a fire or explosion resulting in injury or death. Make sure the battery terminal screws are tightened securely and the covers are installed over the termi- nals.