Kawasaki STX-15F service manual Ignition Coil Installation

14-40 ELECTRICAL SYSTEM

Ignition System

•Pull out the spark plug lead [B] from the ignition coil [A]. Lubricate the leads with penetrating rust inhibitor.

Ignition Coil Installation

•Connectlows. the spark plug lead to each ignition coil as fol- #1 Spark Plug Lead Length 340 mm (13.4 in.) [A]

#2 Spark Plug Lead Length 450 mm (17.7 in.) [B] #3 Spark Plug Lead Length 540 mm (21.3 in.) [C] #4 Spark Plug Lead Length 600 mm (23.6 in.) [D]

○Marked [E] is a number of each lead

•Apply a non-permanent locking agent to the ignition coil mounting bolts.

•Install the #1, 4 ignition coil [F] and #2, 3 ignition coil [G] to the bracket [H].

Torque - Ignition Coil Mounting Bolts: 7.8 N·m (0.80 kgf·m, 69 in·lb)

○Apply a non-permanent locking agent to the bracket bolts.

•Install the removal parts.

○For JT1500-A2 model ∼ ; Replace the double spring clamps with new ones. (see Fuel System (DFI) chapter)