Kawasaki STX-15F service manual Throttle Cable Removal

FUEL SYSTEM (DFI) 3-67

Throttle Lever, Cable and Case

•Tighten:

Torque - Throttle Case Mounting Screws: 3.9 N·m (0.40 kgf·m, 34 in·lb)

•Swingopen. the throttle lever so that the throttle valve is fully

WARNING

Operation with an improperly assembled throttle case could result in an unsafe riding condition.

•Adjust the throttle cable (see Throttle Cable Adjustment).

Throttle Cable Removal

•Removeter). the engine hood (see Hull/Engine Hood chap-

•Remove the band [A] on the delivery pipe [B]

•Disconnect the throttle cable from the body assy. ○Slide out the rubber cap.

○Unscrew the adjuster locknut [A] and slide the cable from the bracket.

○Slide the tip [A] of the cable lower end from the throttle pivot arm.

•Unscrew the mounting screws [A] and remove the han- dlebar pad [B].

•Take out the inner pad