13.2 Error Message
Error message | Possible causes | What to do |
No/bad signal | The satellite dish is not pointing at the | Adjust dish alignment. |
| satellite. |
|
| Signal is too weak. | Increase the LNB voltage or connect a signal |
|
| amplifier. |
| Satellite dish is too small. | Change to a larger dish. |
| Problem with LNB. | Change the LNB. |
| Wrong antenna setting. | Set the antenna correctly. |
|
|
|
The channel is | The channel has a signal, but no audio or | Confirm if the channel is currently on air. |
scrambled or not | video is provided. | ** |
available. | The channel has not been deleted by | Remove the channel from the channel list and |
| ||
| broadcasting company. | check for new transponder details. |
| The channel is for data broadcasting. | The channel cannot be viewed with the |
|
| appropriate model that supports data |
|
| channels. |
|
|
|
Audio not | The channel has a video signal, but no audio | Press the audio button on your remote control |
available. | is provided. | to confirm that the channel has audio options. |
|
|
|
CI module not | CI module is not installed. | Insert CI module. |
installed. | CI module is not properly inserted. | Reinsert CI module. |
| ||
| CI module is not recognized. | Insert a different CI module to check if your |
|
| existing module is working correctly. |
|
|
|
Invalid CI module | Wrong CI module. | Insert the correct CI module. |
| CI module is not properly inserted. | Remove and reinsert the CI module. |
| CI module is damaged. | Replace CI module. |
|
|
|
Short LNB | LNB cable is short. | Replace LNB Cable. |
| LNB is internally short. | Replace LNB. |
| LNB In Port is inserted by alien substance or | Remove the alien substance and contact local |
| damaged. | service center in case damaged has occurred. |
|
|
|
GB 77
