10. Installation
10. Installation
In this chapter you can configure installation settings such as search channels, SMATV search, software update and default setting.
Note: Press the BACK 
button to save the changes and return to the previous menu. Press the MENU 
button to exit the menu screen.
10.1 Search Channels
Search Channels enables you to configure the installation settings.
1.Press the MENU 
button.
2.Select Installation using the 
button, and press the OK 
button.
3.To access installation menu, password is required. Enter the password to proceed.
4.Select Search Channels using the 
button and press the OK 
button.
**
Note: The default password is 0000.
1. Fixed Antenna
You can set the antenna and LNB information for channel search. If the antenna is not properly set, channel search cannot be activated which means you cannot watch any of the programmes on air.
1.Select Antenna and press the OK 
button to view the list of antennas.
2.Select a value for Antenna using the OK 
or 
button.
3.Enter the value for Satellite, LNB Frequency, 22kHz Tone, DiSEqC Input and LNB Voltage.
4.Select Save and press the OK 
button to complete.
GB 55
